2017 SE Racing 29” STR-29 Quadangle Stu Thomsen Replica-1
SE Racing is back at it again with another amazing retro cruiser with the 2017 STR-1 29″. This bike is rumored to have a limited edition fun of only 250 bikes! Our friends at PlanetBMX.com are taking pre-orders now hurry up and grab one before they are gone, and check out more photos of the bike at the Spring Fling event at SE Racing Spring Fling Photos
Bike Info
Before the Quadangle, there was the STR-1. This dates back to the late 1970’s when Stu Thomsen was SE Racing’s National #1 pro and the sport’s first superstar. His signature frame at the time was the Stu Thomsen Replica-1. This STR-1 frame had a unique design with both of the double down tubes wrapping underneath the bottom bracket shell and continuing around the Looptail rear end all the way back to the seat tube. Less than ten STR-1’s were ever produced, and over the years these frames became almost mythical and the most sought after frames of all time in the vintage BMX world. Fast forward nearly 40 years to today and SE is proud to bring you, the limited edition STR-29. All of the unique features and radness of the original STR-1, but built for the bigger rider with 29” wheels. Making history, once again.
Notiable Features
• Stu Thomsen replica model, limited edition & individually numbered.
• Full Cr-Mo frame w/ STR-1 inspired double downtube wrap beneath the
bottom bracket, looptail rear end, individually numbered on the inside of
the rear dropout.
• Full Cr-Mo “40 Years of Radness” edition Cowboy Cut forks.
• Cr-Mo Super Big Honkin’ cruiser bars.
• Double-wall rims w/ sealed bearing high flange hubs.
• Redline Flight cranks w/ alloy SE sprocket.
• Stu Thomsen Signature ODI Mushroom II grips w/ donuts.
• Vee Tire x SE Racing Speedster 29” x 2.10 tires.
• Fluted micro-adjust seat post.
• Vintage Chrome STR Retro Quadangle padset.
• Includes custom Stu Thomsen STR-29 sticker sheet.
FRAME | Stu Thomsen Replica, 100% Cr-Mo Tubing, STR-1 Inspired Double Downtube Wrap Beneath Bottom Bracket, Looptail Rear End, Retro Dropouts, Limited Edition & Individually Numbered on the Inside of the Rear Dropout |
FORK | Cowboy Cut Landing Gear, Full Cr-Mo |
BARS | Cr-Mo Super Big Honkin’ Cruiser Bar, 31″ x 7″ |
STEM | Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach |
HEADSET | Tange 1-1/8″ Threadless |
BRAKES | Tektro 837-AL V-Brake, Slick Cable w/ Tektro 316A, 2-Finger Alloy brake lever |
GRIPS | Special Edition ODI Mushroom II “Stu Thomsen” Signature Dual-Ply Grips w/ SE Donuts, Made in USA |
SEAT | SE Flyer Seat |
SEAT POST | Retro Fluted Micro-Adjust Alloy, 27.2mm |
CRANKS | Redline Flight Cranks, Dual Pinch Bolt, 175mm |
SPROCKET | 33T Alloy SE Racing Sprocket |
BOTTOM BRACKET | Sealed Bearing American Bottom Bracket |
PEDALS | X-Pedo Low-profile Platform w/ Removable Pins |
WHEELSET | Wheelset Sealed Bearing 36H High-Flange Alloy Hubs w/ Double-wall Rims, ACS Crossfire 15T Freewheel, Stainless Spokes, Frame Protector Alloy Washers |
TIRES | Vee Tire Co x SE Racing Speedster, 29″ x 2.10″ Front & Rear |
ACCESSORIES | Chrome STR Quad Padset, Alloy Valve Caps, Alloy Rear Wheel Washers, Cutom Stu Thomsen STR-29 Sticker Sheet |
GEOMETRY |
Top Tube – 22.2″
Head-tube angle – 70°
Seat-tube angle – 72°
Chainstay – 17.8”
BB height – 12.5″
Seat tube length – 16.1″
Stand over height (ground to top tube) – 29.3″
Weight 29.3lbs
|